Welcome to Shanghai Gofun Machinery Equipment Co., Ltd.!
Search

Free consultation hotline

021-59532925

News

News

Service hotline

021-59532925

Industry News

You are here : Home > News > Industry News

Juice Beverage Automated Production Linec

Juice Beverage Automated Production Linec

On a fully automated fruit juice beverage assembly line, the soluble solid content of fresh juice from fruit juice beverage manufacturers can generally reach 10-15%. Most of the fresh juice is water, followed by sugar. The acidic substances are mainly malic acid, citric acid and tartaric acid. Wait. Although the acidity is lower than sugar, it is an important component of the juice. It can make the juice have a mild sour taste and can adjust the flavor of the juice. However, according to the different consumption levels of consumers in the market, the production mode of juice is divided into two types: medium and medium. Fresh fruit type: The raw fruit is directly squeezed as the main material, and the flavor of the original juice is maintained as much as possible by adding no or less preservatives. Ingredients method: It is processed by advanced technology and then ground into powder, and pre-processed, mixed and inspected according to a certain proportion. It is then baked into powder, and then blended when used, and various stabilizers and flavoring agents are added.

On the fully automated fruit juice beverage production line, the water prepared by the fruit juice beverage production equipment manufacturer has higher requirements for conductivity and purity. Whether it is groundwater or mountain spring water, they all need to be filtered and disinfected for other water streams. The device of filter and sterilizer is called: water treatment system. Its filtration principle is to use various processes such as sedimentation, adsorption, physical reaction, membrane filtration, ultraviolet light or ozone to treat water. Only the water after water treatment can meet the basic requirements of preparation, and at the same time ensure that the prepared beverage tastes good.
Fruit beverage automatic filling equipment, juice and other beverages are filled through the blending system. Deploy according to a certain proportion, generally including sugar preparation) and deployment. After saccharification, the syrup and various component additives such as: citric acid, sodium benzoate, coloring, flavor, and the components of added juice components, etc., various raw materials must be put in one by one to avoid indissolution or precipitation. After secondary filtration, uniform degassing. One-time sterilization equipment for liquid materials is an ideal equipment for materials to be sterilized, cooled, and polished until their shelf life. According to the user's process requirements for different materials such as heating, sterilization, heat preservation, and cooling, different process combinations can be designed, with multiple safety protection functions, high temperature alarm, low temperature reflux and other functions.
Fully automated fruit juice beverage production line, the fruit juice beverage production equipment manufacturer’s materials are filled at a temperature of 87℃~95℃; a constant temperature automatic control circulation system is required; filling requirements are fully loaded; an automatic reflux system is required, which can be sealed in a short time ; There should be no air in the bottle after hot filling and sealing. A typical hot-filling valve valve consists of upper and lower parts, the upper roller is pressed on the cam plate, and the upper and lower are reset by springs. The liquid supply pipe below it is connected with the fully enclosed cylinder, and is connected with the enclosed cylinder to return to the air pipe. The system feeds the material to the feeding cylinder, and then enters the filling valve through the hose, and fills it into the bottle. The liquid level is controlled by the filling valve. The air and excess liquid in the bottle enter the feeding cylinder through the return hose. Then enter the accumulator through the pump, and the pump is always on. There is a temperature sensor on the material-liquid circulation system. Once another material-liquid reflux pump starts to discharge the material-liquid reflux, and at the same time, the feeding solenoid valve is closed. The cylinder forms an external circulation, and when the material liquid reaches the temperature, it enters the filling machine.

Related news